Serving, but not limited to, the following East Alabama (AL) communities:

Autauga  County: Prattville

Bullock County: Union Springs

Chambers County: Lafayette, Lanett, Valley

Crenshaw  County: Luverne

Elmore County: Deatsville, Eclectic, Elmore, Wetumpka, Millbrook, Tallassee

Harris County: Cataula, Hamilton, Pine Mountain

Lee County: Auburn, Phenix City, Salem, Smiths Station, Opelika

Lowndes County: Hayneville

Macon County: Tuskegee, Tuskegee Institute, Notasulga

Meriwether County: Manchester, Woodbury, Greenville

Montgomery County: Hope Hull, Montgomery, Pike Road

Pike County: Brundidge, Troy

Tallapoosa County: Alexander City, Dadeville, JacksonsGap

Troup County: Hogansville, Lagrange, West Point

Receivers

Dog Guard® offers three different types of Receivers that are designed to contain small to large-sized dogs. The three receivers are listed below, click their links for a detailed explanation:

• NEW!! DG Micro - for "tiny pets weighing 1 to 10 pounds"  
• DG 5000 - for "small, timid, passive and up to medium sized" dogs
• DG 9 XT - for "medium to stubborn and tough to train" dogs

DG Micro Receiver
back to top

Features

This DG Micro receiver is designed to contain "tiny pets" weighing 1 to 10 pounds.

• This receiver is waterproof and has a LIFE TIME warranty provided it was not damaged or abused. Dog Chews are covered under the LIFE TIME warranty. Your Dog Guard professional dealer will show you ways to prevent dog chews.

• The fail safe feature shuts the receiver down 30 seconds after it has been activated. The receiver will reset itself once it has been removed from the signal field for 3 seconds. This feature assures that your pet will not be continuously stimulated should he become caught in the signal field.

• The DG Micro receiver provides pulsating stimulus that your Dog Guard professional dealer will adjust to your pet's temperament.

• This receiver can be ordered in the encoded mode or in the non-encoded mode; with or without a one-second delay.

• The receiver in the encoded mode is immune to stray signals and provides up to 32 levels of initial stimulation that is controlled at the transmitter. When the pet enters the first signal field, it will receive a warning tone or stimulation. Should the pet stray into the second signal zone, the receiver will automatically increase to a stronger stimulus. The maximum stimulus can be controlled by using shunts.

• When ordered with a one-second delay, the pet will receive a one-second audible warning prior to stimulation; if he does not retreat from the signal field, he will receive a stimulus.

• It is available in two frequencies.

• Dimensions:

  • Width: 1.125" - Height: 1" - Length: 1.875"

  • Material: Lexan/ABS - Probe Spacing: 1.125" - Weight: 1.8 oz.

DG 5000 Receiver
back to top

Features

This DG 5000 receiver is designed to handle "small, timid, passive and up to medium sized" dogs.

• This receiver is waterproof and has a LIFE TIME warranty provided it was not damaged or abused. Dog Chews are covered under the LIFE TIME warranty. Your Dog Guard professional dealer will show you ways to prevent dog chews.

• The fail safe feature shuts the receiver down 30 seconds after it has been activated. The receiver will reset itself once it has been removed from the signal field for 3 seconds. This feature assures that your pet will not be continuously stimulated should he become caught in the signal field.

• The DG 5000 receiver provides pulsating stimulus that your Dog Guard professional dealer will adjust to your pet's temperament.

• This receiver can be ordered in the encoded mode or in the non-encoded mode; with or without a one-second delay.

• The receiver in the encoded mode is immune to stray signals and provides up to 32 levels of initial stimulation that is controlled at the transmitter. When the pet enters the first signal field, it will receive a warning tone or stimulation. Should the pet stray into the second signal zone, the receiver will automatically increase to a stronger stimulus. The maximum stimulus can be controlled by using shunts.

• When ordered with a one-second delay, the pet will receive a one-second audible warning prior to stimulation; if he does not retreat from the signal field, he will receive a stimulus.

• It is available in two frequencies.

• Dimensions:

  • Width: 1.125" - Height: 1.125" - Length: 2"

  • Material: Lexan/ABS - Probe Spacing: 1.125" - Weight: 2 oz.

Features

The DG 9 XT receiver is designed to handle the "medium to stubborn and tough-to-train" dogs. It works well with dogs that are runners such as Huskies, Labs and hunting dogs.

• This receiver is waterproof and has a LIFE TIME warranty provided it was not damaged or abused. Dog Chews are covered under the LIFE TIME warranty. Your Dog Guard professional dealer will show you ways to prevent dog chews.
• The fail safe feature shuts the receiver down 30 seconds after it has been activated. The receiver will reset itself once it has been removed from the signal field for 3 seconds. This feature assures that your pet will not be continuously stimulated should he become caught in the signal field.
• The DG 9 XT receiver has the highest pulsating stimulus in the industry. Your Dog Guard professional dealer will adjust the stimulus to your pet's temperament.
• This receiver can be ordered in the encoded mode or in the non-encoded mode; with or without a one-second delay.
• The receiver in the encoded mode is immune to stray signals and provides up to 32 levels of initial stimulation that is controlled at the transmitter. When the pet enters the first signal field, it will receive a warning tone or stimulation. Should the pet stray into the second signal zone, the receiver will automatically increase to a stronger stimulus. The maximum stimulus can be controlled by using shunts.
• When ordered with a one-second delay, the pet will receive a one-second audible warning prior to stimulation; if he does not retreat from the signal field, he will receive a stimulus.
• It is available in two frequencies.
• Dimensions:
  • Width: 1.1875" - Height: 1.125" - Length: 2.25"
  • Material: Lexan/ABS - Probe Spacing: 1.125" - Weight: 2.2 oz.